 |
PUSH/PULL TOGGLE CLAMPS |
|
PUSH/PULL TOGGLE CLAMPS |
|
 |
| UNIT : mm |
| *Plunger locks at both ends of travel. *High strength steel construction and precisely broached body for square plunger, allow these clamps to be used as pin locating gauges. *Hardened steel pins and bushings at pivot points. *Clamp can be mounted using base (supplied) or mounted by drilling a hole in fixture and welding in place. Clamp handle can be rotated to any position. Supplied with separate handle and base. *User can weld them in desired position. |
| Model | Holding Capacity |
Weight | Spindle | A | B | C | D | E | F | G | H | K | L | M |
| GH-30519M | 1136kg | 1640g | GH-SA-125017 | 30 | 8 | 70 | 19 | 59.5 | M12 P=1.75 | 50.8 | 221 | 152.4 |  21.7 |
25.4 |
| GH-30619M | 2273kg | 3500g | GH-SA-165020 | 40 | 11.2 | 90.5 | 25 | 77.8 | M16 P=2 | 68.3 | 283 | 152.4 | 27.2 |
38.1 |
 |
 |
 |
 |
 |
GOOD HAND ENTERPRISE CO., LTD.
 |
NO.2, ROAD 12, TAICHUNG INDUSTRIAL PARK, TAICHUNG, TAIWAN, R.O.C. |
| P.O.BOX 46~35 TAICHUNG TAIWAN | |
| TEL:886-4-23592127~8, 23592162 | |
| FAX:886-4-23592129 | |
| E-MAIL:info@goodhand.com.tw |
