logo.gif (2452 bytes) HYDRAULIC SWING CLAMPING CYLINDERS
 
  HYDRAULIC SWING CLAMPING CYLINDERS


  FEATURES:
The clamping cylinders are used when machining a workpiece by means of a machine tool in a restricted area.
The clamping cylinders are double-acting pull cylinders with a total stroke of swing stroke plus clamping stroke.
The clamping cylinders are available at four or five standard sizes with clockwise and counterclockwise swing. The mounting types include flange and threaded types.

  NOTES:
If a longer clamping arm is desired, please keep the length of clamping arm within 1.2 times of that of the standard clamping arm.
When a longer clamping arm is used, please reduce the operating pressure as appropriate.
Installation of a flow control valve is recommended to install so as to protect cylinder body and internal components.


MODEL NO. AS / ATS ASD / ATSD
BORE(,mm) 25 32 40 50 63 25 32 40 50
OPERATION TYPE DOUBLE ACTING
OPERATING FLUID OIL
OPERATING PRESSURE(BAR) 20 ~ 45
MAXIMUM
PRESSURE(BAR)
70
SWING ANGLE 90 2 (SPECIAL ANGLE IS OPTIONAL)
SWING DIRECTION CLOCKWISE (R) OR COUNTERCLOCKWISE (L)
MATERIAL OF CYLINDER BODY ANODIZED AND HARDENED
ALUMINUM ALLOY OR S45C
 

HOW TO ORDER :
HS
--
25
R
x
90
model bore swing direction swing angle
 

Note : 1. NATS and NATSD produced by order.
2. Subject to change without notice.
 

 


GOOD HAND ENTERPRISE CO., LTD.

home.gif (3533 bytes) NO.2, ROAD 12, TAICHUNG INDUSTRIAL PARK, TAICHUNG, TAIWAN, R.O.C.
P.O.BOX 46~35 TAICHUNG TAIWAN
TEL:886-4-23592127~8, 23592162
FAX:886-4-23592129
E-MAIL:info@goodhand.com.tw